Tutorial · Intermediate
Drip irrigation and soaker hoses
Drip irrigation puts water at the roots, keeps leaves dry (less disease), wastes less to evaporation and makes even watering easy — the cure for blossom-end rot and cracking.
Steps
- Measure beds and decide: soaker hoses are cheapest; drip tape or tubing with built-in emitters is more even over long runs.
- From the spigot: backflow preventer, filter, pressure regulator (most drip runs at about 25 psi), then hose adapter.
- Lay lines 12 in apart in beds (closer in sandy soil), emitters about 12 in apart.
- Cap the ends, run the system, and check that every emitter wets the soil.
- Cover lines with mulch to reduce evaporation.
- Use a battery timer. Start with about 30–60 minutes two or three times a week, then adjust: the soil should be moist 6 in down but not soggy.
- Flush the lines and drain them before freezing weather.
How much water
Most gardens need about 1 in per week, more in heat and for containers. A rain gauge tells you what nature already gave.
Sources
Guidance follows university Cooperative Extension recommendations. Ranges are general; varieties, soils and microclimates differ. Your county extension office can give local advice.